User guide

VIRDI AC 1000 User Guide 44
UNION COMMUNITY CO.,LTd.
3Fl. Hyundai Topics Bldg, 44-3 Bangi-dong, Songpa-gu, Seoul, Korea 138-050,
Tel: [phone], Fax: [phone], E-Mail:[e-mail],
4.1.2. Card authentication
For a user who is registered as [RF], [RF|FP], or [RF|PW], when placing the
card close to the default screen, a beep sound will be heard and the
authentication result appears on the LCD.
07/08/25 PM 4:58
If you place your card close to the unit, you will hear
a beep.
▼
07/08/25 PM 4:58
If authentication is successful, you will see a success
message on the LCD together with the voice
message “You are authorized”. The door open icon
and the card icon turn on LCD.
The default screen appears after 1~2 sec., and the
door is closed when the door open setting time has
elapsed.
※ Error message: An error message appears together with the voice message
“Please try again”.
.
07/08/25 PM 4:58
Non-registered card used.
07/08/25 PM 4:58
During the authentication request to the
authentication server, network trouble occurred or
the line is disconnected.
For a user who is registered as [RF&FP] or [ID&FP | RF&FP], when placing
the card close to the default screen, a beep will be heard and the following
fingerprint authentication screen appears.
07/08/25 PM 4:58
When the light on the fingerprint input window turns
on together with the voice message “Please enter
your fingerprint”, enter your fingerprint and hold it
there until you hear a beep.
http://www.unioncomm.co.kr