Specifications

AC6000
TM
Configuration Manual 92
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.virditech.com
Note: If during extreme cases you have no response on your touch screen at all it may be
impossible to navigate to this screen. You can force a hardware reset calibration. Power down
the terminal and place a short (wire) between Wiegand IN1 (WI0) and Wiegand OUT1 (WO1),
power up the terminal and wait for a reboot. The calibration program will appear.
3.2.9. Terminal Information
In the terminal information section system, event, picture, network information can be viewed here.
Nothing is programmable in this section; this section provides the status of the system and a summary
of some key settings. Touch the Done icon when finished.
3.2.9.1. System Information
This area provides important information about the terminal. The firmware version, ram usage and
hard disk usage is in this area. These can be important for troubleshooting and determining the
terminal’s limit. The harddisk is the amount of memory being used for user data, log events,
pictures and system settings.