Specifications

AC6000
TM
Configuration Manual 74
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.virditech.com
3.2.6.6. Face Detection
Face Detection is used as an extra authentication method to ensure there is a valid person at the
terminal at the time of authentication. This feature will only detect the presence of a face. It will
NOT identify a registered user at the terminal. It is only used for verifying the authentication. This
feature must be used in conjunction with a Fingerprint, Card or Password. Normally, a fingerprint
is difficult to reproduce, however a card or password can be easily stolen. When the option(s) are
enabled, and a fingerprint OR card OR Password is authenticated successfully, the terminal will
then take a picture and analyze the presence of face in the picture. If no face, eyes, or mouth is
detected the terminal will not allow access. In some cases a thief may try to hide their face, eyes
or mouth with a mask, this method will ensure a viable person is verifying their authentication.
This verification method is used in local authentication only, not server. The camera display must
be enabled for this function to work.
3.2.6.6.1. Authentication Type
Card Check Box – if enabled, and a valid registered card is presented at the terminal, the
terminal will verify the presence of a face before allowing access.
Fingerprint Check Box – if enabled, and a valid registered fingerprint is used at the terminal, the
terminal will verify the presence of a face before allowing access.
Password Check Box – if enabled, and a valid registered password is used at the terminal, the
terminal will verify the presence of a face before allowing access.
3.2.6.6.1.1. Detection Level
This option is a combo box and you can select 1 of 2 levels.
Level 1 = Face Detection Only
Level 2 = Face and Eyes. Use this level if you want a higher level of security. This level will take
slightly longer to authenticate.