Specifications

AC6000
TM
Configuration Manual 56
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.virditech.com
3.2.5.2.1. Time & Attendance Schedules
Touch the
icon to change the start time, normal time and finish time. Touch the area you
wish to change and a number pad will appear for you to enter your data. Touch ‘Done’ to save
and finish. For each area enter a time range that best represents that time. If these times are
programmed, the terminal will automatically change to that time period when the time is within the
range. For example if the ‘Start Time’ is programmed for 8:00am to 9:00am, the terminal will
automatically change to ‘Attend Mode’ if the current time is between 8-9am. If Finish Time is
programmed for 17:00 to 18:00, the terminal will change to ‘Leave’ mode if the current time is
between 5-6pm. Using this method, the user will not have to press the function key for Attend,
Leave, Out or In, since the terminal automatically enters the mode.
Each field requires two time entries; this is a range for example start time is from 08:00
to 10:00
Start Time: This is the time that represents the start of the day, a normal time range of
when the employees arrive at the office for that day.
Normal Time: This is the time between the start time and finish time, the time of normal
working hours.
Break In Time: This is the time used to indicate when a user’s break is normally
started