Specifications

AC6000
TM
Configuration Manual 52
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.virditech.com
Only one communication link is possible at one time, if you select (checked) Wireless Enabled
then all network communication will be done with wireless. The hardwire LAN connection will not
be used, even as a backup. You must disable (uncheck) the Wireless Enabled checkbox to use
the hardwire LAN connection. The areas marked in RED are touch interactive.
Wireless Checkbox – If checked, wireless will be used to communicate on the network
connection
Available Networks – if the button is pressed a scan of available networks in the area will be
done and a message like the above window “Searching for Wireless Stations..” will appear.
Available Stations – After the scan is complete a list of available stations will appear, the station
should have ‘broadcast essid’ on. Once you find the station you want just press the row that has
the name of the station you want to connect to. The station that is currently connected will be
highlighted in dark blue.
Current Network – this area will provide information about the currently connected station.
Advanced Options – Press this button to set advanced settings (Rate/Channel/Encryption Type)
Wireless
Checkbox
Scan
Stations
Available
Stations
Currently
Connected
Station
Advanced
Options