Specifications

AC6000
TM
Configuration Manual 19
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: [phone], Fax: [phone],
E-Mail:[e-mail], http://www.virditech.com
1.5. Voice Operation
Voices are played during certain events. Below is a list of possible voices that will be played.
Voice volume can be controlled separately from the sound volume. The voice feedback can be
turned off if needed.
“Please enter your fingerprint”
Enter fingerprint using the fingerprint input
window
“You are authorized” Successful authentication
“Please try again” Authentication failed
“Input your ID” When a user ID is required
“Please enter your card” Scan your card when you hear this message
1.6. Sound Operation
Sounds are played during events or interaction with the Touchscreen. Button presses, message
popup, correct and incorrect entries, failed or success authentication will produce a single sound
tone. Sound volume can be controlled separately from the voice volume. Sounds can be turned
off if needed.
1.7. LED operation
On the front of the terminal on the bottom left corner there is a Virdi logo. When power is applied
to the unit and during normal operation this will light up as red when a card is used to access
the terminal the color will turn green for half a second then back to red.
When the door is opened the color will turn green for the duration of the door open period, then
turn back to red when the door is closed.
1.8. Touchscreen Usage
To use the Touchscreen correctly it is recommended to use your finger only. For cleaning use a
dry cloth to wipe the surface. You can use a stylus pen if you wish. Do not use sharp objects.
Almost anywhere on the screen is touch interactive. For example, if a popup window is displayed,
touching the window will make the window disappear. Firmly touch the icon that you wish to use.
The icon color will change and a sound should be heard.
In the administrator programming area, if a number entry is needed just touch the number field or
text you wish to change, a number pad will appear for you to enter the data.