User guide

AC-2100 User Guide 51
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.8.3.2. 1:N Level Setting
<1:N Level>
3 4 5 6 7 8 9
[ESC][ ]← [ ][ENT]→
Default setting: ‘4’
This is the menu that sets the authentication level in case of using only
fingerprint input without ID input.
This function is used to locate the corresponding fingerprint by comparing the
fingerprint entered in the fingerprint input window with the fingerprints saved in
the terminal database.
In case of 1:N authentication level, setting authentication level for each user is
not allowed and terminal's authentication level is used as basis.
Press [ENT] button to continue setting.
3.8.3.3. LFD Setting
<LFD >
0.None
1.Low
2.Medium
3.High
[ESC][ ][ ][ENT]↑↓
Default setting: ‘0.None’
This menu sets the LFD level that can prevent the input of imitation fingerprints.
A higher LFD level strengthens the function for preventing the input of imitation
fingerprints made using materials such as rubber, paper, film and silicone.
However, a higher LFD level may also prevent the input of real fingerprints if
they are too dry.
After selecting a setting value, press [ENT] button to continue setting.
3.8.3.4. Similar Fingerprint Registration Restriction Setting
<Check SameFP>
1.Enable
2.Disable
[ESC][ ][ ][ENT]↑↓
Default setting: ‘1.Enable’