User guide

AC-2100 User Guide 40
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
After selecting a setting value, press [ENT] button to finish authentication
method setting and move to the upper menu.
3.5.3. Door Setting
If [3.Option] is selected at the main menu, the following screen is displayed.
1. Application
2. Verify Option
3. Set Doorlock
4. Sound Control
5. LCD Setting
6. Time Setting
[ESC][↑][↓][ENT]
Select [3.Set Doorlock] for door setting.
3.5.3.1. Door Open Duration Setting
◆ At default screen [F2~] Æ [3.Option] Æ [3.Set Doorlock] ◆
<Open Duration>
(00-30):03
[←] [↑] [↓] [→]
Default setting: ‘03’ (Unit: Second)
This option sets the duration of time until the door is locked again after the
door is opened through authentication success in the terminal. Strike type
represents a time when the door is locked again automatically after the door
is opened through authentication success. In case of dead bolt type and
automatic door, the door operates regardless of these setting values.
‘
If it is set to ‘00’, door control is not possible. Use ‘00’ setting only when the
lock is not connected.
After selecting a setting value, press down [F4] button for a longer period of
time to continue setting.
3.5.3.2. Door Open Status Check
◆ At default screen [F2~] Æ [3.Option] Æ [3.Set Doorlock] Æ [F4~] ◆