User guide

AC-2100 User Guide 30
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
<Add FP>
Please try again
Reenter the same fingerprint.
Be sure to note that you must remove the finger from the fingerprint input
window before you make the second fingerprint input attempt. When
registration is completed, the system returns to “1.Add” selection screen. Up to
3 trials can be done should the registration fail.
The following are the LCD messages displayed during the registration process.
Modification Completed! In case of registration success
Modification Failed! In case of registration failure
Fingerprint registration
failed!
In case fingerprint image quality is poor or no
fingerprint input is entered within 10 seconds after
fingerprint sensor is lighted
Already registered FP In case of trying to register an already registered
fingerprint
Excess of the limit In case 10 fingerprints are already registered in the
corresponding ID
[3] In case of selecting Add CARD
<Add CARD> Press [ESC] button to cancel registration.
After the card is placed, the buzzer sound for success is heard and a newly
entered card number is added.
If more than 3 card change trials fail, the buzzer sound for failure is heard and
the system returns to “1. Add” selection screen.
The following are the LCD messages displayed during the registration process.
Modification Completed! In case of registration success
Modification Failed! In case of registration failure
Already registered card In case of trying to register an already registered
card
Excess of the limit In case 10 cards are already registered in the
corresponding ID