User's Guide
UBio-X Slim User Guide 37
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : +82-2-6488-3000 , Fax : +82-2-6488-3099,
E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr
4.2. How to punch for TnA
In TnA mode, user must click function key before authentication. And the log is transferred to
server with information which function key is selected. If the function key was not pressed on
authentication, it is possible not to record the TnA type firmly for user’s ‘Attend’, ‘Leave’, ‘Out’, “In’.
So it should be pressed for each case before authentication.
“UBio-X Slim” model displays the Function keys on the bottom side as following pictures.
Simple TnA mode
In this mode, the User ID is pressed after pressing Function
key and then try to authenticate.
The function keys in Simple TnA mode are defined as below.
- F1: Attend
- F2: Leave
If the function key is pressed before authentication, the
pressed key “F1” or “F2” will be recorded on the
authentication logs so that they are used on Time &
Attendance software.
Normal TnA mode
In this mode, the User ID is pressed after pressing Function
key and then try to authenticate.
The function keys in Normal TnA mode are defined as below.
- F1: Attend
- F2: Leave
- F3: Out
- F4: In
If the function key is pressed before authentication, the
pressed key “F1”to “F4” will be recorded on the authentication
logs so that they are used on Time & Attendance software.