User's Guide

UBio-X Slim User Guide 22
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
because matching the fingerprint against all user data.
However, if you want to be authenticated faster, to use 1:1 is
better than to use 1:N even 1:N is more convenient than 1:1.
Auth Sequence
There are 4 Auth Sequence modes in “UBio-X Slim”. And these
are operated with Server software.
- Server  Terminal : Authentication starts by Server and if it
was not searched, authentication will be started by Terminal
automatically.
- Server Only : Authentication should be done by Server only.
- Terminal  Server : Authentication starts by Terminal and if it
was not searched, authentication will be started by Server
automatically..
- Terminal Only : Authentication should be done by Terminal
only.
3.4.2. TnA
When using TnA mode, the user should press the Function key
before authentication, and then the authentication log will be
transferred with the pressed function key number.
It makes manage the TnA efficiently when pressing each
Function key for employee’s situation. (F1(Attend), F2(Leave),
F3(Out), F4(In))
There are three TnA types in “UBio-X Slim” and it is selectable
among ‘Simple’, ‘Normal’, ‘Expand’.
‘Simple’ type has 2 Function keys and ‘Normal’ type has 4
Function keys, ‘Expand’ type supports the multiple Function
keys up to 63keys.
‘Simple’ & ’Normal’ types have the fixed function keys as
below.
(F1 : Attend / F2 : Leave / F3 : Out / F4 : In)
In case ‘Expand’ type, the Function keys are editable freely by
software administrator.