User's Guide

UBio-X Slim User Guide 21
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
This menu is to configure the Authentication option, TnA
mode, Timezone and to search the log information.
3.4.1. Normal
To set the ‘Verify Level(1:1)’, ‘Identify Level(1:N)’, ‘Auth Type’
and ‘Auth Sequence’ from the terminal, select [Menu]  [Auth]
 [Normal] in order.
Verify Level / Identify Level
Security Level for FP is adjustable per each Auth Type. For
Verify Level(1:1), default is 5 but it can be selected from 1 to 9.
For Identify Level(1:N), default is 8 but it can be selected from
5 to 9. Security Level is too higher, FRR(False Rejection Rate) is
more increasingly but it is too lower, FAR(False Acceptance
Rate) is more increasingly. So please use the default value if
not special case. These are applied to all users except the user
has the individual setting on registration.
Auth Type
The model “UBio-X Slim” supports both 1:1 and 1:N Auth
Types. When using 1:1, insert the User ID or swipe his
registered Card before placing his registered finger. But using
1:N, place your finger without input User ID or swipe the Card