User's Guide

UBio-X Slim User Guide 18
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
The first registered user from terminal will be an administrator
automatically.
Administrator can do register, delete, modify, search for the
user by using the ‘User’ menu.
3.3.1. Register
The maximum number of users to enroll to the terminal are 200,000 templates for FP users but Card
users or PW user can be enrolled up to 500,000 users. For example, when 10,000 users have 200,000
FP templates totally stored on the terminal, 490,000 users have the Card or PW can be registered on
the terminal additionally.
1. To register a new user to the terminal, select [Menu]  [User]
 [Register] in order.
2. Insert the User ID you want to give after pressing the button
“Input ID”.
3. When selecting the button [Admin] from ‘Permission’, this user’s
privilege will be changed. Basically there are two buttons to
select the user’s privilege between administrator and normal
user.
To finish registration of user from the terminal, at least more than one Auth method should be
registered among ‘FP’, ‘Card’, ‘PW’. And then the user will be registered when pressing the button
[SAVE] after selecting ‘Auth combination’.
3.3.2. Modify
Administrator and normal user have the different privilege as below.
- User : Access door only
- Admin : Access door + Enter the menu mode of terminal