User's Guide

UBio-X Iris User Guide 29
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: [phone], Fax: [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
※When you authenticate with duress FP, the alarm message can be transferred to the server
and you can output the dry contact signal if you set the duress FP alarm from the setting
of lock from the terminal menu. (Refer to ‘3.7.4. Lock’).
② Enter the fingerprint with referring
‘1.7 Proper fingerprint registration and
input methods’. Enter the fingerprint
twice according to the screen
instruction as follows.
When the light is turned on at the
fingerprint sensor with the message
‘Register FP’, put your finger on the
input screen and wait for 2~3 seconds
until the light is turned off.
③ When the message ‘Enter the
same fingerprint again’ appears, enter
the same fingerprint again.
※
In the second fingerprint input
after the first fingerprint, you should
take your finger off the sensor once
and place it again.
④ The message of the left side
appears when the input is completed.
If you click [OK]
button, the
registration is completed and the
screen is returned to the previous
menu.
If you want to register again, you can
click [Retry]
button and then go
through the registration process from
②
.
But if you want to cancel the
registration, you can click [ ] button.