User's Guide
Table Of Contents
- Table of Contents
- 1. Before use
- 2. Product introduction
- 3. Environment setting
- 4. How to use the terminal
UBio-X Iris User Guide 13
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,
E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr
Notes
- It is recommended to register and authorize at the location where the terminal is
installed.
- If you close your eyes or turn your eyes to the side, the iris recognition rate may
decrease. It is recommended to locate the face at the front as far as possible
- The color lenses or sun glasses can decrease the recognition rate of iris.
Cautions in the installation
- Be sure to install the terminal indoor.
- Do not install under the light bulb.
- Not recommended in the circumstance of backlight or direct light.
1.7. Proper fingerprint registration and input methods
Correct fingerprint registration methods
Place your index finger on the window just as you do with a finger stamp.
Do not use the tip of the finger.
Make sure the center of your finger touches the window.
(Please be cautious that you may result in low temperature burns when inserting
f inger.)
Use your index finger if possible, which is the easiest for orientation and guarantees a
stable input method. Using the thumb or baby finger can be awkward and may result
in a bad image.
Check if your fingerprint is unclear or damaged.
It is tricky to recognize fingerprints on dry, wet, unclear, or injured fingers. Use
another finger in this case.