User's Guide

UBio-X Face User Guide 30
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: [phone], Fax: [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
3.3.1.6. Card registration
Register with clicking [Card] button in the [Add User]
button. Click [ ] button to cancel and return.
※
If you entered the card already registered, the
following message appears.
※If a user tried over than 10 registrations, the
following message appears.
3.3.1.7. Authentication option
▶’FP Level’ (Basic setting: ’0’)
It decides the fingerprint authentication
level of each
user, and the registered users can have different
authentication level by modifying this value. If you set
‘0’, the authentication
uses the level of fingerprint
authentication.
For example, if you select the “1” for FP Level, this user
will be applied with “1” on 1:1 FP Level.
But you select “0”
for this level, the user will be applied
with the configured 1:1 FP Level on the “System >
Finger”.
▶’Enable FP 1:N’ (basic setting: Registered FP user exist.
[v])
If this option is checked, you can authorize only with
fingerprint without user ID or card
▶’Enable Face 1:N’ (basic setting: Registered Face user
exist. [v])
If this option is checked, you c
an authorize only with
face without user ID or card.