Quick Guide

23 152 49 365 75 664 101 455
24 155 50 371 76 703 102 462
25 156 51 411 77 712 103 523
26 162 52 412 78 723 104 526
Call mode
Individual Call
_ Enters into the ‘Contacts’ menu by pressing menu button.
_ Select an ID that the user wants to communicate with and press the PTT button to
communicate. (ID should be pre-programmed by its PC programmer and a transmitting
radio’s ID should be listed in a receiving radio)
Group Call
_ Enters into the ‘Contact’ menu by pressing menu button.
_ Select a Group ID that the user wants to communicate with and press the PTT button to
communicate with all radios in the group. (Group ID should be pre-programmed by its PC
programmer and a transmitting radio’s ID should be listed in all radios in the group.)
All Call
_ Enters into the ‘Contact’ menu by pressing menu button.
TOT
TOT function is used to prevent from using one channel continuously for a long time. If a
radio transmits longer than the programmed TOT time continuously, the transmitting is
automatically stopped and an alert sound is generated. If a Penalty time was set up, then the
radio can make transmitting normally only after the penalty time. The TOT and penalty time
can be set up by using PC programmer and can change it at menu mode by user.
Key Lock
To set this function ON, press menu button to enter into Settings -> Radio Set -> Keypad
Lock’ and press menu button again. If you press menu button, this function will be
deactivated.
PSC
This function is used to extend the battery lifetime by reducing the power consumption
during standby.
This function can be established by using the PC program and users can change it at Menu
mode on the radio. (Settings -> Radio Set -> PSC ->Enable/Disable by menu button)
Password
Users can set up a password into each radio. If the Password function was enabled, the
radio will request the Password on the LCD screen when users turned on the radio. When
users input the correct password,then the radio is activated. This function can be established
by using the PC program and users can change it at Menu mode.
Language
Users can select a language to be displayed on the LCD screen between English or Korean.
This function can be established by using the PC program and users can change it at Menu
mode.
SMS
Users can select one of the 10 short messages pre-programmed into your radio to send.