Instruction manual

Magnetic Force (MFM) Imaging
Installation of the Extender Electronics Modules
Rev. B MultiMode SPM Instruction Manual 233
Important Points
• Extender-compatible microscope electronics are required to permit operation of the
phase detection extender option. Standard electronics on these microscopes require
hardware upgrades. Consult your Veeco sales representative for details.
•Turn off the power to the NanoScope controller whenever connecting or disconnecting
the Extender.
13.3.2 Quadrex Extender
The Quadrex Extender installs to a NanoScope IIIA in the same way as the Basic Extender
described above and has similar hardware requirements. Quadrex operation requires NanoScope
software version 5.12 or later.
13.3.3 NanoScope IV
The NanoScope IV integrates Quadrex electronics into the design and requires no modifications or
additions for MFM.
WARNING: Do not insert a conducting object (e.g., screwdriver) into
the Extender Electronics while it is engergized.
AVERTISSEMENT: Ne pas insérer d’ objet conducteur (par exemple:
un tournevis) dans le boîtier d’extension de
electronique (Extender Electronics) quand celui-
ci est sous tension.
WARNUNG: Stecken Sie keine leitfähigen Teile (zum Beispiel
Schraubenzieher) in die Extender Electronics, während
diese eingeschaltet ist.