Instruction manual

Force Imaging
176 MultiMode SPM Instruction Manual Rev. B
• Force Calibration (TappingMode): Section 11.5
• Force Plots: Section 11.5.1
• Obtaining a Force Plot (TappingMode): Section 11.5.2
• High Contact Force: Section 11.5.3
• Tip Selection: Section 11.5.4
• Force Modulation: Section 11.6
• Introduction: Section 11.6.1
• Selecting a Force Modulation Tip: Section 11.6.2
• Operating Principle: Section 11.6.3
• Force Modulation Procedure: Section 11.6.4
• Notes About Artifacts: Section 11.6.5
• Force Modulation with ‘Negative LiftMode’: Section 11.7
• Set Interleave Controls: Section 11.7.1
• Obtain a TappingMode Image: Section 11.7.2
• Obtain a Negative LiftMode Force Modulation Image: Section 11.7.3
• Force Volume: Section 11.8