Quick Guide

Removing the Battery
Pack
*Ensure the ON/OFF volume switch of the radio is set to OFF position.
*Press down the locker and slide the battery pack down side
of the radio. See Figure.
Charging the Battery Pack
New batteries or batteries that have been stored, but not used for a long time should be fully
chargedbefore placing into service. Low battery voltage would shorten the talk range and
affect the performanceof the radio.
When the battery pack requires charging, the battery indicator in the LCD will blink and the
radio willsound a high pitch tone every second.
How to Charging
_ Plug the standard desktop charger into the electricity power outlet for AC 100 ~ 240V.
_ The standard desktop charger has two slots for charging.
_ To recharge the radio with the battery installed, insert the radio into the front slot of the
chargerafter you turned off the radio.
_ To recharge a battery only, insert the battery into the rear slot of the charger.
_ Although the Green LED is on after recharging the battery, please continue recharging the
batteryfor another 30 minutes to ensure the complete full charging.