User's Manual

Maintenance Manual
UDM-240ZH/ZBH
12
- Check the battery indicator using the “menu” button, and FND displayed as below.
E– F(100%), E– 4(75%), E– 3(50%), E– 2(25%), E– E(Need to charge)
HOW TO CHARGE
 UDM-240ZH input power is DC 1.5V, UDM-240ZBC input power is DC12V ~ 24V.
 LED Indications of charger
Status LED
Charging Blue LED : ON
Fully charged Blue LED : OFF
☞
CAUTION
Battery charger used with UDM-240ZH must be supplied by UNIMO Technology
Co., Ltd
Other manufacturer’s can cause unexpected damage of the battery and terminal.
CAUTIONS
 The UDM-240ZH is designed to be used with the supplied charging cradle only. In case of
all the problems or damages caused by use of other chargers, manufacturer will be free
from its responsibility of all the problems or damages.
 DO NOT disassemble and short circuit because it may cause fire or explosion.
 Be careful when the battery terminals touch the metal or conductor, it can damage to
your device or human body.
 Never expose under direct sunlight and do not charge near fire.