User's Manual

Maintenance Manual
27
 Ear/Microphone jack of original radio connect to the target radio through cloning cable.
 If pressing the “F3” button of the original radio, the copy is executed. After completing the copy,
“Clone complete” message will be displayed on the LCD.
Removing the cloning cable, turn off and on the power of 2 Radios. Please use the radio after checking if
the copy is succeeded without problem.
Wireless Cloning
 The original radio should be turned ON with pressing the
Monitor button and press “F1” button then radio is ready to set
the transmitting mode. “CLONE(TX)” message will be
displayed on the LCD screen.
 The radios to be copied should be turned ON with pressing the
Monitor button and press “F2” button then radios are ready to
set the receiving mode. “CLONE(RX)” message will be
displayed on the LCD screen.
 The copy is executed when pressing the “F3” button of the original radio.
 After completing the copy, “complete” message will be displayed on the LCD screen.
☞
CAUTION`
If the Cloning is made into other maker’s Radio, a critical malfunction can happen.