User's Manual

Maintenance Manual

If the radio receives Revive ID from the other radio, the Radio returns back to the original with a ”beep”

sound.

BCL/BCLO

BCL/BCLO function is used not to interrupt the other users who are using the same frequency. If

BCL/BCLO is activated then transmitting is prohibited from the same channel that was used for others. In

this case, alert sound is heard and message is displayed on the LCD.

BCL(Busy Channel Lock) : Prohibit transmission from the same frequency.

BCLO(Busy Channel Lock Override) : Prohibit transmission in case of different sub-tone.

TOT

TOT function is used to prevent from using one channel continuously for a long time. If the radio

transmits over the TOT time continuously, the transmitting is automatically stopped and an alert sound is

generated. If a Penalty time is set up then the radio makes transmitting normally after the penalty time.

The TOT and penalty time can be setup by PC programmer.

Key Lock

Pressing and holding the “F4” buttons over 2 seconds then Key Lock

is activated when the radio is standby mode. And the indicator Icon is

ON. Up/Down and Menu buttons doesn’t operate during this function

is activated. Key Lock function can be deactivated, pressing the

“F4” buttons once more when the Key Lock is activated.

Initial

The radio should be turn on with pressing the “F3” button. The radio can be initialized the setting of the

function by user. And display “INITIAL” on the LCD screen.

Whisper mode

It can be possible to amplify the very low voice for the normal transmitting voice. It can be changed on

the PC programmer or Menu mode on the radio.