Troubleshooting guide

Airport Bag Tag Printers Unimark ET6000 Bag Tag Printer
7
1.3.4 Clearing Stock Jams
In the unlikely event a stock jam occurs in the ET6000 printer, complete the following steps to clear the
jam and continue printing operations:
2 Insert the stock between the right and left guides until it is detected by the Top of Form (TOF)
sensor and the print motor starts advancing.
3 The stock will automatically be pulled in by the platen and detected by the Present Senor (PS).
4 The stock is now loaded and ready for printing.
Step Action
1Press the RESET button on the front panel. If the jam does not clear by itself, go to step 2.
2 Power off the unit.
The print head is sensitive to ESD.
Step Action (Continued)