Troubleshooting guide

Airport Bag Tag Printers Unimark ET6000 Bag Tag Printer
6
1.3.3 Loading Fan-Fold Stock
To load fan-fold stock, follow these steps:
Step Action
1 Grip the adjustment paddle.
2 While holding the left guide straight, move it right or left to widen or narrow the input path.
3 Insert stock approximately 1” into the guide posts.
4 Make any final adjustments to the input path so that it is as close to the stock width as possible.
The input path should be no larger than .01” of the stock width.
5 While holding the adjustment paddle and ensuring guides are against the installed stock, turn
the lock-down screw clockwise until it bottoms out against the wall.
Note: To use a different width stock, turn the lock-down screw counterclockwise to loosen the
rails. Retighten the screw after the correct width is determined.
Step Action
1 Grip the stock firmly with the thermal printing surface facing up.