Troubleshooting guide

Airport Bag Tag Printers Unimark ET6000 Bag Tag Printer
5
1.3 Loading Paper Stock
1.3.1 Adjusting Input Path Size
The ET6000 printer is equipped with a simple input path adjustment method. To adjust the input path, fol-
low these steps:
1.3.2 Locking Down the Input Path
The ET6000 printer is equipped with a lock-down thumbscrew to secure the path guides. To secure the
guides, follow these steps:
Step Action
1 Grip the adjustment paddle.
2 While holding the left guide straight, move it right or left to widen or narrow the input path.
3 Insert stock approximately 1” into the guide posts.
4 Make any final adjustments to the input path so that it is as close to the stock width as possible.
The input path should be no larger than .01” of the stock width.
5 The input path adjustment is self-centering; no other positioning adjustments are required.