Troubleshooting guide

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer
49
8 Loosen (do not remove) the two screws securing the daughter board and pull up on the board to
remove it.
IMPORTANT!
The above photo shows the daughter board with the print head/paper stock guide rail assembly
already removed. It is for illustration purposes only. However, even with that assembly still in
place, you have clear access to the screw securing the right side of the board. Because the
assembly partially hides the screw securing the left side of the daughter board, use a small thin
screwdriver.
9 Loosen (do not remove) the two nuts on the bolts securing the left side of the print head/paper
stock guide rail assembly.
Step Action (Continued)
Screws securing
daughter board
Nuts on bolts