Troubleshooting guide

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer
33
2.3.3 Initial Set Up and Adjusting Name Location
Connect the 8500 printer to the AC outlet and power on. Before adding paper, complete the following pro-
cedure:
Step Action
1 The following message should be displayed:
OUT OF STOCK
REPLENISH-RESET
2Press MENU. The following message is displayed:
PRINTER FUNCTIONS
DISPLAY STATUS
3 Using the arrow keys, scroll down until the following message is displayed:
PRINTER FUNCTIONS
SERVICE FUNCTIONS
4Press ENTER. The following message is displayed:
SERVICE FUNCTIONS
PASSWORD
Note: In the next series of steps, you will be entering the password 0123.
5Press ENTER. You will see four (4) zeros displayed, the first of which is flashing.
6Press ENTER. The second 0 (zero) begins flashing. Press the Up Arrow key one time and the
second 0 (zero) now becomes a 1 (one).
7Press ENTER. The third 0 (zero) begins flashing. Press the Up Arrow key two times and the
third 0 (zero) now becomes a 2 (two).
8Press ENTER. The fourth 0 (zero) begins flashing. Press the Up Arrow key three times and the
fourth 0 (zero) now becomes a 3 (three).
9Press EXIT. The message PASSWORD ACCEPTED will display momentarily and then the
following message is displayed.
SERVICE FUNCTIONS
PASSWORD
10 Press the Down Arrow key until the following message is displayed:
SERVICE FUNCTIONS
DIAGNOSTICS
11 Press ENTER. Press the Down Arrow key until the following message is displayed:
DIAGNOSTICS
MAINTENANCE