Troubleshooting guide

Airport Bag Tag Printers Unimark 8500 Bag Tag Printer
31
2.2.3 Control Panel’s Keypad
2.3 Paper Stock
2.3.1 Adjusting the Paper Size
The Unimark 8500 accepts paper stock widths from 1.75 to 3.5 inches. The paper path guide rails adjust to
meet these dimensions. A paper path adjustment thumb spindle is used to adjust the paper path guide rails
to fit the stock.
To adjust the paper path, complete the following steps:
Key Action
RESET • If offline and no alarms exist, performs a form feed. If an alarm exists, performs an
alarm clear sequence.
• If online, printer will realign the stock. This can be used if the operator pulls the
next tag past the exit sensor while removing a printed tag.
ONLINE Toggles the printer’s offline or online mode.
MENU Enters into the Printer Function menu.
TEST Executes selected diagnostic test.
ENTER Enters a menu level.
EXIT Exits a menu level.
ARROW KEYS Select menu entries or parameters.
Step Action
1 Loosen the spindle lock to allow adjustment of the thumb spindle.