Troubleshooting guide

Airport Bag Tag Printers Unimark ET6000 Bag Tag Printer
24
1.5 Stock Cutter
1.5.1 Cutter Location
The ET6000 printer’s stock cutter is in the front of the unit. It is designed to cut between each stock piece
at approximately the perforation point.
1.5.2 Cutter Operation
The cutter is designed to:
• Cut between each stock piece at approximately the perforation point.
• Monitor the cutter and automatically detect when the cut is made.
• Release stock at the time of the cut.
• Reset stock position for the next print and cut cycle.
• Be set up through the front panel, and the exact operation will depend on customer require-
ments.