Operator`s manual

6.0 Front Panel
6.1 Keypad/Display Layout
STOCK - Indicates that the
Unit is out of stock.
RESET - Used to clear erro
r
messages and conditions.
⇐⇒⇑⇓ - Arrow keys are used to navigate
through the menu system.
The ⇑ ⇓ arrow keys are also used to change the
display contrast/intensity while the Unit is in the
ONLINE state.
N
ew versions of firmware provide an alternate
adjustment requiring the RESET key to be
pressed first, then using the ⇑ ⇓ arrow keys to
adjust contrast.
The new firmware function was designed to
p
revent operators from accidentally changing
the display contrast to minimum and being
mistaken for a unit fault condition.
ENTER - Used to access the
Unit’s menu system. Pressing
this key moves the operator up
one menu level or selects a
particular setting.
EXIT - Pressing this key
moves the operator back one
menu level or cancels a
particular operation.
ALERT - Notifies the operato
r
of a condition that needs
immediate attention.
POWER - Indicates that the
Unit is powered.
ONLINE - Indicates that the
Unit is in the online state. The
ONLINE LED also flashes
when the Unit is receiving and
transmitting data.
ONLINE - Used to change the
Unit state from ONLINE (ready
to receive data from the hos
t
and print tags) to OFFLINE
(standby state).
The front panel incorporates a 2X20 (2 line, 20 character) display
p
roviding the operator with information about the Unit’s state. The
display is also used to navigate the Unit’s menu system, allowing the
operator to change settings and address conditions to which the Unit has
alerted the operator.
Page 7 of 38 71U-1415-100K; REV E ET6000 Operator’s Manual