Operator`s manual

8.6 Cleaning/Clearing the Center Top Of Form Sensor (TOF)

1. Press the front panel release button. Lift the

front panel up and out of the way.

3. Grip the stock firmly from the rear o

and remove.

4. Clean the top of form transm

using a dry cloth. Veri

particles, paper stock, and dust. Use

to clear sensor.

off adhered

2. Pull the print head release lever forw

the print head up away from the plat

ard and lift

f the Unit

itter and receiver

fy they are clear of

canned air

Do not use alcohol except to clean

labels or adhesives.

ET6000 Operator’s Manual 71U-1415-100K; REV E Page 30 of 38