Specifications Sheet
DISTRIBUTOR INFORMATION HERE
* Agency approvals may vary depending on confi guration.
Consult factory for details. Standard domestic voltage 208-240/60/3. 230V/50Hz/1&3 phase and 380V/50Hz/3 phase units
are available. All CE approved models available in 50-cycle. Contact your distributor for specifi c models available with CE.
For electrical specifi cations, circuit breaker requirements and full load amperages, see your authorized UniMac
®
distributor.
Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 3-phase machines.
For the most accurate information, the installation guide should be used for all design and construction purposes. Due to
continuous product improvements, design and specifi cations subject to change without notice. The quality management
systems at Alliance Laundry Systems’ Ripon facility has been registered to ISO 9001:2008.
©2014 Alliance Laundry Systems LLC. Printed in the U.S.A.
To learn more, or to fi nd a distributor in your area, visit UNIMAC.COM
Alliance Laundry Systems - Shepard St, Ripon WI 54971 - 1.800.587.5458 - 1.920.748.3121
MODELS UT50 UT55 UT75 UT75 FAST DRY
Dry Weight Capacity - lb (kg) 50 (22.7) 55 (24.9) 75 (34.0) 75 (34.0)
Cylinder Size - in (mm)
(diameter x depth)
37 x 30
(940 x 762)
33 x 35 (838 x 889) 37 x 36
(940 x 914)
37 x 36
(940 x 914)
Cylinder Volume - cu. ft. (liters) 18.6 (528) 17.3 (491) 22.4 (634) 22.4 (634)
Width - in (mm) 38 5/8 (981) 34 1/2 (876) 38 5/8 (981) 38 5/8 (981)
Depth - in (mm) 48 1/4 (1226) 53 5/8 (1365) 54 1/4 (1378) 54 1/4 (1378)
Height - in (mm) Gas and Electric - 76 5/8 (1946)
Steam - 76 5/8 (1946)
66 3/4 (1695) Gas and Electric - 76 5/8 (1946)
Steam - 76 5/8 (1946)
Gas - 76 5/8 (1946)
Steam and Electric - N/A
Motor -
HP (W)
Non-Rev
Reversing (cylinder and fan)
1/2 (373)
1/3 (249), 1/3 (249)
1/2 (373) 3/4 (560)
1/3 (249), 1/3 (249)
N/A
1/3 (249), 1 (746)
Air Outlet Diameter - in (mm) 8 (203) 8 (203) 8 (203) 10 (254)
Airfl ow - cfm (liters/sec.) 750 (354) 60 Hz: 700 (330)
50 Hz: 600 (283)
60 Hz Gas and Steam Models
920 (434)
Electric and 50 Hz Gas and Steam
750 (354)
1100 (519)
Reversing Cylinder Option Option Option Standard
Water Inlet Size (C.A.R.E. System) (1) 3/4"-11 1/2" NH Hose Connection (1) 3/4"-11 1/2" NH Hose Connection (1) 3/4"-11 1/2" NH Hose Connection (1) 3/4"-11 1/2" NH Hose Connection
Plumbing Connection - in (mm) Gas Models -1/2" NPT (13)
Steam Models - 3/4" NPT (19)
Gas Models – 1/2" NPT (13)
Steam Models – N/A
Gas Models - 1/2" NPT (13)
Steam Models - 3/4” NPT (19)
Gas Models - 3/4" NPT (19)
Steam Models - N/A
Energy Data Gas Models - 130,000 Btu/hr
(38.1 kW)
Steam Models - At 100 psi (6.9 bar):
5.1 BHP, 177,500 Btu/hr (52.0 kW);
Recommended operating pressure
80-100 PSIG
Electric Models - See Below
Gas Models – 112,000 Btu/hr
(32.8 kW)
Steam Models – N/A
Electric Models – 27 kW
Gas Models - 165,000 Btu/hr
(48.3 kW)
Steam Models - At 100 psi (6.9 bar):
6.1 BHP, 210,000 Btu/hr (61.6 kW);
Recommended operating pressure
80-100 PSIG
Electric Models - See Below
Gas Models - 225,000 Btu/hr
(65.9 kW)
Steam Models - N/A
Electric Models - N/A
Electrical Specifi cations Gas and Steam Models - Gas Models -
Amps
100/200-220/60/1 9.8/4.9
120/208-240/60/1 9.2/6.5
200-208/240/60/3 4.0/3.9
Electric Models –
208/60/1 129
240/60/1 115
200/60/1 125
200-208/60/3 79
240/60/3 65
Gas and Steam Models - Gas Models -
Amps
200-208/240/60/3 6.3
460-480/60/3 3.1
Net Weight - lb (kg) 545 (247) 435 (197) 615 (279) 710 (322)
Shipping Weight - lb (kg) 602 (273) 476 (216) 677 (307) 772 (350)
Agency Approvals* Gas Models -
cCSAus, CE, Australia Gas
Electric and Steam Models -
cCSAus, CE
CSA, CE Gas Models -
cCSAus, CE, Australia Gas
Electric and Steam Models -
cCSAus, CE
Gas Models -
cCSAus, CE, Australia Gas
Non-Rev Rev
120/60/1 13.8 13.0
200-208/240/60/1 7.6 7.0
200-208/240/60/3 3.8 4.3
380/60/3 1.8 2.1
460-480/60/3 1.9 2.1
230-240/50/1 6.7 7.0
200/50/3 3.5 4.5
230-240/50/3 3.5 4.9
380/400-415/50/3 1.8 2.1
Steam Only -
440/60/3 1.9 2.1
Electric Models -
30 kw
200-208/60/3 89 88
240/60/3 79 78
380/60/3 47 48
480/60/3 38 38
200/50/3 84 85
230/50/3 73 75
240/50/3 79 78
380/50/3 47 48
400-415/50/3 43 44
440/60/3 41 41
Amps Amps
Non-Rev Rev
120/60/1 9.3 12.6
200-208/240/60/1 5.1 6.5
200-208/240/60/3 2.8 4.0
380/60/3 1.6 2.0
460-480/60/3 1.4 1.9
230-240/50/1 6.3 6.9
200/50/3 3.3 4.2
230-240/50/3 3.1 4.3
380/400-415/50/3 1.6 2.0
Steam Only -
440/60/3 1.4 1.9
Electric Models -
30 kw
200-208/60/3 89 88
240/60/3 79 78
380/60/3 47 48
480/60/3 38 38
200/50/3 84 85
230/50/3 73 75
240/50/3 79 78
380/50/3 47 48
400-415/50/3 43 44
440/60/3 41 41
Electric Models -
21 kw
240/50/1 93 95
AU14-0010
UT SERIES TUMBLE DRYERS 50-75 LB