Operations Manual

• A dedicated ground conduit (wire) must be connected be-

tween the electrical service box ground bar and tumble dryer

ground screw.

WARNING

To reduce the risk of electrical shock, de-energize

the electrical circuit being connected to the tumble

dryer before making any electrical connections. All

electrical connections should be made by a qualified

electrician. Never attempt to connect a live circuit.

W409R1

CAUTION

Label all wires prior to disconnection when servicing

controls. Wiring errors can cause improper and dan-

gerous operation. Verify proper operation after serv-

icing.

W071

For CE Models Only

All OPL (non-vend) models are factory-equipped with an emer-

gency stop button on the front panel. If the emergency stop func-

tion is desired on coin-operated models, an external emergency

stop button may be installed.

NOTE: Activation of the emergency stop switch stops

all machine control circuit functions, but DOES NOT re-

move all electrical power from machine.

Service/Ground Location

Ground and Terminal Block Locations for Non-CE Models

TMB2269N_SVG

1. Junction Box

2. Terminal Block

3. Earth/Ground

4. Electrical Service

Figure 26

Electrical Requirements

DO NOT COPY or TRANSMIT

55 Part No: 70457901ENR14