User's Manual

SR3 Installation Guide
& User Manual
AN1031 V1.0 Copyright ©2019 UniKey Technologies. All rights reserved.
UNIKEY PUBLIC.
5
Prox
Prox Prox
Prox Weigand
Weigand Weigand
Weigand Format
FormatFormat
Format
• Modulation technique: ASK or FSK modulated proximity cards or fobs. PSK is not supported.
• Output Weigand format: 26 to 37-bit.
o Note 26 bit verified by UL
• Frequency: 125 KHz RFID
• The control system can distinguish between the type of credential used. How this is done
depends on the access control system being used.
Reader Wiring
Reader Wiring Reader Wiring
Reader Wiring
Conductor RED BLACK GREEN WHITE PURPLE ORANGE YELLOW BLUE DRAIN
Purpose
DC +6-
16 VDC
Ground Data 0 Data 1 Red LED Beeper
Card
Present
Green
LED
Shield
Ground
Current Draw:
Current Draw: Current Draw:
Current Draw: 100mA (typical @ 12VDC)
100mA (typical @ 12VDC)100mA (typical @ 12VDC)
100mA (typical @ 12VDC)
UL 294 Performance Levels
UL 294 Performance LevelsUL 294 Performance Levels
UL 294 Performance Levels
MODEL #
ACCESS CONTROL
LINE SECURITY
LEVEL
DESTRUCTIVE
ATTACK LEVEL
ENDURANCE
LEVEL
STANDBY
POWER LEVEL
CONDITION
UniKey SR3 Level I Level I Level IV Level I N/A
Temperature
Temperature Temperature
Temperature / Humidity Conditions
/ Humidity Conditions/ Humidity Conditions
/ Humidity Conditions
• The recommended ambient temperature conditions for SR3 functionality are between -35 to
66°C
• The recommended humidity conditions for SR3 functionality is less than or equal to 85%.
Commented [LJ1]: Note “26 bit verified by UL”
Commented [LJ2]: “-35”