User's Manual

SR3 Installation Guide

& User Manual

UNIKEY PUBLIC.

Mounting the Reader

Mounting the ReaderMounting the Reader

Mounting the Reader

• If the unit is used to control a door or pedestrian gate, locate the unit as near as practical to the

entry point. If the unit is mounted on or in a wall adjacent to the entry point, be sure the wall is

sturdy. The repeated shock and vibration from a slamming access door or spring- loaded

pedestrian gate must be isolated from the unit.

• Never mount the reader directly on a moving door or gate.

• Choose a well-lit location near the controlled opening. Wiring access for power, network, and

earth ground must be available to the mounting location.

Mullion Mounted Single-gang Mounted

Mounting

MountingMounting

Mounting

• Both the Mullion and Single-gang readers can be mounted on a wall or any suitable flat surface.

The mounting plate can be used to cover various sized holes in the wall or surface.

Mobile Device and Software

Mobile Device and SoftwareMobile Device and Software

Mobile Device and Software

• The SR3 utilizes BLE version 5.0 or greater.

• The UniKey SR3 is it to be used in conjunction with the UniKey Mobile App (Version 1.0 or

higher).

• In order for the SR3 to function properly, the mobile device’s software must be up to date.

• iOS Devices: iOS 10.0 or higher

• Android Devices: v5.0 (Lollipop) or higher and peripheral mode supported.

• To maintain security users shaA means of verification shall be employ a means of verification ed

by the user to enable access to the wireless electronic device such as a PIN or biometric feature.

• The wireless electronic device is not capable of command, control, programming, or any other

system manipulation and it is only to be used in the same manner as a physical credential.