User`s guide

Safety-2

Safety

However, adequate protection including clothing

and ventilation must be provided if dangerous

liquids are used. In case of incidental spillage, carefully

wipe with a dry cloth, taking into account the nature

of the spilled liquid and the necessary safety

precautions.

Cleaning, installation, dismantling, maintenance,

adjustment and repair should only be performed by

personnel trained in such work, and who are aware

of the possible dangers involved. This instrument

must not be sterilized, using an autoclave, or any

other mechanical device. When you need to clean

this instrument, use one of the three following

methods:

1 - a clean dry cloth,

2 - a cloth dampened with water,

3 - a cloth dampened with soapy water.

If a cloth dampened with soapy water is used to

clean the pump, only domestic soap may be used.

No other form of detergent or chemical may be used.

These electronic and hazard symbols appear on the

pump:

Symbol Explanation

Alternating current

PROTECTIVE CONDUCTOR

TERMINAL

On (Supply switch)

Off (Supply switch)

Caution, risk of electric shock

Caution (refer to User’s Guide)