User`s guide

4-39
Operation 4
Simple programs are given in list two and three for
the Low pressure error file and the High pressure
error file. In both programs, the flow rate is pro-
grammed to be 0 mL/min. This is a simple example
of an error file.
Enter these two error programs before run-
ning Example 1. After entering the two
pressure error programs, the system is ready
to run. Press Run. The display will look as
opposite. Press Roll to display in turn the
flow rate, %A, %B, %C, return to the run
screen. When the method program is fin-
ished, the Ready-to-Run screen is displayed.
Programming Examples
Program List 1
Key to press Notes
Menu
File
1/ENTER Select file 1
New/Edit Go to file
1/ ENTER 1 Loop
None No link at end of method
Out Program the output
0/ ENTER At 0.00 minutes
1/ENTER Output # 1
Close Close output # 1
Add Add the next timed event
Flow Enter the flow rate
0/ENTER At 0.00 minutes
1/ENTER Flowrate = 1mL/min.
Add Add the next timed event.
Flow Enter the flow rate
2/ENTER At 2.00 minutes.
4/ENTER Flowrate = 4mL/min
End Finish writing method
Solvent A consumption: 5mL
Quit Go to Ready-to-Run screen
Program List 2
Key to press Notes
Menu
File
11/ENTER Low pressure safety file
New/Edit Go to file
1/ENTER 1 Loop
None No link to other files
Flow/ENTER Enter the flow rate
0/ENTER At 0.00 minutes
0/ENTER Flow rate = 0mL/min
End Finish writing safety file
Quit
Program List 3
Key to press Notes
Menu
File
12/ENTER High pressure safety file
New/Edit Go to file
1/ENTER 1 Loop
None No link to other files
Flow/ENTER Enter the flow rate
0/ENTER At 0.00 minutes
0/ENTER Flow rate = 0 mL/min
End Finish writing safety file
Quit