User`s guide

4-33
Operation 4
If there is more than one file in the method, i.e.
one file is linked to another, the program will go
back to the beginning of the first file in the
method.
• If there is a program stored in File 14: after the
power is restored, the program in file 14 will be
run. If there is a link to another program at the
end of file 14, the linked file will start to run. If
the alarm is on, it will sound.
If there is a power failure in the Flow or Dispense
modes, it has the same effect as if the pump was
turned off and turned on again. The screen pre-
sented will be the Ready-to-Run Screen of the last
used mode.
Programming the Safety Files