User`s guide

3-7
Installation 3
Positioning the Modules
Auto-Preparative System
This is a binary gradient system with two elution
pumps, one injection pump, one manometric module,
one mixer, one detector and one fraction collector.
In this configuration, automatic injection is
performed by the injection pump, located
below the master pump.
The pumping system consists of one 305
Master pump and two 306 slave pumps. The
305 Master pump should be the top pump.
This makes the hydraulic connections to the
manometric module as short as possible
which gives the best results. It is also easy to
read the display and to use the keypad (see
the opposite figure).