User`s guide

2-3

Description 2

Keypad

The figure below shows the keypad with the

numeric keys, the display and the soft keys.

Power-on indicator Display

Softkeys

PRIME HELP

CANCEL ENTER

Numeric keypad

Display: two 24-character lines are used to dispaly

parameters commands and messages.

Softkeys: their functions are determined by the

software and may change from menu to menu. The

present functions are displayed above each softkey.

PRIME: the pump runs at its maximum flowrate

until you press the STOP stoftkey.

HELP: dispays advice and instructions at any time,

with no effect on the operation of the pump.

CANCEL: cancels your last entry before it has been

stored in the memory.

ENTER: confirms a selection or parameter value and

stores it in the memory.

Numeric keypad: this is used to key in values

during programming. The parameter being modified

is always underlined with a flashing cursor.