Technical data

List of Display Messages

The following list shows messages that may appear on the main screen

of the Smartline Pump 1000 and the pages of this manual on which they

are described.

SYSTEMTEST OK 9

Conflict with existing programs 13

Start Time Is Fixed 22

Delete this line? Confirm by cursor 33

Error signal was detected 33

List of Error Codes

Table 6 Error codes in GLP Menu

Error Code Meaning

5 Motor failure

9 ERROR IN signal detected

10 Switch off due to exceeding maximum current

12 Switch off due to exceeding maximum pressure

13 Switch off due to falling below minimum pressure

23 Motor blocked

33 Calibrating values re-initialized

34 Calibrating curve re-initialized

35 Combination of error codes 33 and 34