User's Manual

ARES/ATHENA
Solutions for a Real Time World User Manual
RE-TEK-1890 10 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Toll Free: [phone]
Copyright Unigen Corporation, 2009
INDUSTRY CANADIAN REGULATORY APPROVAL
Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels
and other regulatory requirements. It is the position of the Industry Canada agency that the
OEM primarily responsibility for ensuring end product compliance. Unigen as grantee and
supplier of the module maintains responsibility for the Modular Approved design.
Design Criteria for Modular Approval
General Conditions
The following conditions must be strictly adhered to for modular approval:
1. No modification to the module including the circuitry is permitted
2. The design criteria including antenna, interconnects and transmission line
3. Testing of the final device configuration for Digital Emissions Compliance
The UGWSX933SM0033U may not be altered or modified in any way by the OEM or other
integrator(s). Additionally, no component(s) may be added which change the radio frequency
(RF) characteristics. These include unintentional or spurious emissions, immunity, ESD
characteristics, or other items commonly associated with RF devices. This includes all
components; passive and active (such as RF filters, RF amplifiers, RF switches, etc).
Additionally, no RF components may be placed between the RF output of the
UGWSX933SM0033U and the antenna(e) except the RF interconnect transmission line.
Antennae
The antennae listed in the UGWSX933SM0033U datasheet have been qualified and approved for use
under the Modular Approval certification. These antennae are designed to be compatible with
the RF transmission line impedance and frequency range of the UGWSX933SM0033U. These
antennae may not be modified or altered in any way from the original design as represented in the
antenna datasheets as supplied by the manufacturer.
The antennas selected have been specifically tested with the UGWSX933SM0033U, and they are
certified through the regulatory agencies in the US, Canada, and European Union for authorized use.
Use of antennas in a platform other than the antennas selected by Unigen voids the MA grant
for that platform.