User's Manual

WirelessUSB™ - UGWM1US
Solutions for a Real Time World User Manual
UM-UGWM1US 14 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail] TEL: [phone] FAX: [phone]
http://www.unigen.com Toll Free: [phone]
Copyright Unigen Corporation, 2004
UNITED STATES AND INTERNATIONAL TYPE APPROVAL
(STANDARD REGULATORY EQUIPMENT CERTIFICATION)
OEMs may need to obtain standard equipment regulatory agency certification as previously
noted herein, and for end-product deployment in countries where Modular Approval is not
recognized, or for implementations using non-certified antennae or interconnections.
The details of standard equipment regulatory compliance are beyond the scope of this
document. OEMs needing standard equipment regulatory testing or who need council for
determining regional requirement should contact approved certification and test service
providers accordingly.
The following test house(s) have been identified by Unigen to assist in both US and
International approval processes. This list is by no means complete or preferential:
1. M. Flom Associates, Inc.
Filing with certification facilities typically requires the submission of technical information (ie
block diagrams, schematics, etc.) pertinent to the radio portions of the UGWM1US. Unigen
will provide assistance in obtaining such documents when required by the OEM.
CONTACT INFORMATION
Outside of the United States of America:
To locate in-country Unigen distributors of the UGWM1US, please refer to the Unigen Website
www.unigen.com. These distributor(s) represent local contacts for this product.
CORPORATE HEADQUARTERS:
Unigen Corporation
45388 Warm Springs Boulevard
Fremont, CA 94539, USA
Mark Morrissey:
1.510.688.2088 X2087
Fax: [phone]
Email: [e-mail]
Web: www.unigen.com