Quick Start Guide

San Gabriel Quick Start Guide

Solutions for a Real Time World User Guide

- 26 –

Connecting to an OPEN Network (Unsecure)

To connect to a network, double click on one of the available networks in the available networks

tab if the adapter has not already connected to the network already. If connecting to a network

that is not broadcasting the SSID and the SSID is blank, please refer to the section on “Creating

Profiles” of this manual.

Connecting to a SECURE Network (Security Enabled)

To connect to a secure network, you will need to know the network encryption key, password or

passphrase of the network to successfully connect to the network.

WEP/WPA/WPA-2 Security

To connect to WEP/WPA/WPA-2 enabled secure network, double click the network in the

“Available Networks” tab. This will launch a “Wireless Network Properties” box. Enter in the

network key, password or passphrase in the Network Key blank fields. The Realtek WLAN

Utility will automatically choose the Network Authentication and Data Encryption. Click “OK”.