User's Manual

UGWDR82NUH50A
Solutions for a Real Time World User Manual
UM- UGWDR82NUH50A 9 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Toll Free: [phone]
Copyright Unigen Corporation, 2009
INDUSTRY CANADIAN REGULATORY APPROVAL
Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels
and other regulatory requirements. It is the position of the Industry Canada agency that the
OEM primarily responsibility for ensuring end product compliance. Unigen as grantee and
supplier of the module maintains responsibility for the Modular Approved design.
Design Criteria for Modular Approval
General Conditions
The following conditions must be strictly adhered to for modular approval:
1. No modification to the module including the circuitry is permitted
2. The design criteria including antenna, interconnects and transmission line
3. Testing of the final device configuration for Digital Emissions Compliance
The UGWDR82NUH50A may not be altered or modified in any way by the OEM or other
integrator(s). Additionally, no component(s) may be added which change the radio frequency
(RF) characteristics. These include unintentional or spurious emissions, immunity, ESD
characteristics, or other items commonly associated with RF devices. This includes all
components; passive and active (such as RF filters, RF amplifiers, RF switches, etc).
Additionally, no RF components may be placed between the RF output of the
UGWDR82NUH50A and the antenna(e) except the RF interconnect transmission line.
Antennae
The antenna is integrated in the module and has been qualified and approved for use under
the Modular Approval certification. This antenna is designed to be compatible with the RF
impedance and frequency range of the UGWDR82NUH50A. This antenna may not be modified
or altered in any way from the original design as represented by the manufacturer.
The antenna selected have been specifically tested with the UGWDR82NUH50A, and they are
certified through the regulatory agencies in the US, Canada, and European Union for
authorized use. Use of an altered antenna in a platform other than the antenna selected by
Unigen voids the MA grant for that platform.
Emissions Compliance Testing
Notwithstanding the Modular Approval for the Radio Device with associated interconnect and
antennae, the end product configuration must meet digital emissions compliance and must be
tested in accordance with Industry Canada RSS-210 (Low Power License-Exempt Radio
communication Devices) requirements confirming radiated emissions are within specified
limits.