User's Manual

NEMO Bluetooth Radio Module
Solutions for a Real Time World Datasheet
Re-Tek - 1573 - 20 - 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Customer Comment Line: [phone]
Copyright Unigen Corporation, 2008
The firmware was written against the Bluetooth v2.0+EDR specification.
• Bluetooth components:
o Baseband (including LC)
o LM
o HCI
• Standard UART HCI Transport Layers
• All standard Bluetooth radio packet types
• Full Bluetooth data rate, enhanced data rates of 2 and 3Mbps
• Operation with up to seven active slaves
• Scatternet v2.5 operation
• Maximum number of simultaneous active ACL connections: 7
• Maximum number of simultaneous active SCO connections: 3
• Operation with up to three SCO links, routed to one or more slaves
• All standard SCO voice coding, plus transparent SCO
• Standard operating modes: Page, Inquiry, Page-Scan and Inquiry-Scan
• All standard pairing, authentication, link key and encryption operations
• Standard Bluetooth power saving mechanisms: Hold, Sniff and Park modes, including
Forced Hold
• Dynamic control of peers' transmit power via LMP
• Master/Slave switch
• Broadcast
• Channel quality driven data rate
• All standard Bluetooth test modes
The firmware's supported Bluetooth features are detailed in the standard Protocol Implementation
Conformance Statement (PICS) documents, available from http://www.csr.com.