User's Manual

Solutions for a Real Time World NEMO2 Design Guidelines
Applicationnote
The Nemo2 module is a complete Bluetooth 2.4GHz radio transceiver operating in
the license free ISM (Industrial, Scientific and Medical) band. The Nemo module has
CSR’s BlueCore 6 ROM Bluetooth solution. The CSR BlueCore 6 ROM is a single-chip
radio and baseband IC for Bluetooth 2.4GHz systems including enhanced data rate
(EDR) to 3Mbps. With the on-chip CSR Bluetooth software stack, it provides a fully
compliant Bluetooth v2.1 + EDR specification system for data and voice
communications. The Nemo2 is a complete separate PCBA module with dimensions
measure 6.5mm x 6.5mm x 1.5mm. A single 3.3V power supply input, single ended
RF output/input, and a low 26 pad count makes the NEMO module easy to interface
with. The module contains on board supply regulation, radio crystal oscillator,
BALUN and bandpass filter.
CSR
BLUECORE 6 ROM TRANSCEIVER IC
BlueCore™6-ROM is a single-chip transceiver radio and baseband IC for Bluetooth
2.4 GHz systems. With the on-chip CSR Bluetooth software stack, it provides a fully
compliant Bluetooth system to v2.1 of the specification for data and voice
communications with buffered modulation/data inputs to ensure that the device will
comply with Part 15 requirements with any type of input signal.
The device incorporates auto-calibration and built-in self-test (BIST) routines to
simplify development, type approval and production test. All hardware and device
firmware is fully compliant with the Bluetooth v2.1 +EDR specification (all
mandatory and optional features).