User's Manual

Solutions for a Real Time World
ANTHIAS BLE Module
User Manual
Re-Tek - xxxx - 7 - 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Customer Comment Line: [phone]
Copyright Unigen Corporation, 2012
PRODUCT DESCRIPTION
The Anthias module is a complete Bluetooth Low Energy module solution. Anthias includes the
Bluetooth Low Energy radio transceiver, 32 kHz slow clock for ultra low power modes, internal
microcontroller for BLE applications software and profiles. Anthias is based on Cambridge Silicon
Radios CSR1000™ chipset. The module is capable of supporting embedded applications along
with ATT, GATT, SMP, L2CAP and GAP BLE stack component. The module is a separate PCB with
contained RF design in a 22mm x 18mm x 3mm compact design. The RF output can be either
through an on-board chip antenna or taken to an external antenna via a U.FL mini-coaxial
connector.
MODULE DETAILS
Bluetooth Low Energy Radio
 +7dBm with power level control from
integrated 6-bit DAC over a dynamic range
>30dB.
 -89dBm receiver sensitivity with integrated
channel filters, digital demodulator for improved
sensitivity and co-channel rejection and fast AGC
for enhanced dynamic range.
Baseband and Software
 Hardware MAC for all packet types enables
packet handling without involving the MCU.
Auxiliary Features
 Power management features with software
shutdown and hardware wake-up
 Internal 32KHz clock for dormant modes
 Power-on-reset cell detects low supply voltage
Physical Interfaces
 SPI master interface
 SPI Programming and debug interface
 I²C
 Digital PIOs
 Analog IOs
Bluetooth Stack
 Bluetooth v4.0 specification protocol
stack runs on integrated MCU.
 Slave operation (master operation
possible later with firmware update)
 Includes Encryption
 GAP profile
 L2CAP
 Security Manager
 Attribute Protocol and Profile
 Bluetooth Low Energy profile support
Package
 Size: 22 x 18 x 3 (mm)
 25 pad LGA Surface Mount