User's Manual

Solutions for a Real Time World
ANTHIAS BLE Module
User Manual
Re-Tek - xxxx - 5 - 45388 Warm Springs Blvd. Fremont, CA 94539
[e-mail]
TEL: [phone] FAX: [phone]
http://www.unigen.com Customer Comment Line: [phone]
Copyright Unigen Corporation, 2012
PRODUCT INTRODUCTION
Anthias is a product from the Unigen BTLE family. Anthias is a single-mode Bluetooth Low Energy
(BLE) module solution. Anthias enables ultra low-power connectivity data transfer for applications
previously limited by the power consumption, size constraints and complexity of other wireless
standards. The Anthias module provides everything required to create a Bluetooth low energy
product with RF, baseband, microcontroller, qualified Bluetooth v4.0 stack and customer
application running on a single module.
FEATURES AND BENEFITS
 Bluetooth Low Energy v4.0
 Chip antenna or U.FL RF connector configuration
 512K programmable EEPROM for BLE profiles and applications
 Optional external Serial Flash support
 64K of RAM
 32KHz clock included with watchdog timer for ultra low power dormant modes
 Accessible UART interface to embedded applications
 12 Digital I/O pads
 3 AIO pads; 10-bit ADC
 2 LED pads supporting Pulse Width Modulation (PWM)
 ~ +7dBm transmit output power
 ~ -89dBm receiver sensitivity
 RSSI monitoring for proximity applications
 Size: 22 x 18 x 3 (mm)
 25 pad LGA Surface Mount form factor
 -20C to +70C temperature range
 Power Consumption: 16mA Peak; < 600nA dormant mode
 Certifications: TDB